Table of Contents
Advertisement
DISPLAY TIMES
3.5.5
The measured O
buttons can be used to select and alter the display times.
Press "Enter" to return to the "Display times" menu.
Select "Main menu" and press "Enter" to return to the main menu.
PRODUCT DEFINITION
3.6
The 9065C offers the possibility to define 10 different products that relate to the measurement
process times. When the 9065C is delivered, all the products are set to default values. The
Products Configuration menu is accessed as follows:
1. Press "Enter" until the Waltron logo is displayed.
2. Besides the software version number, the 9065C serial number is also displayed.
3. Press "Enter" again.
4. The main menu will now be displayed.
5. Use the arrow buttons to select the "Configuration" menu and then press "Enter" to open
the menu.
6. Use the arrow buttons to select the "Formula/Prod.Def." menu and then press "Enter" to
open the menu.
7. The product that is selected at that moment will be displayed.
8. The arrow buttons can be used to select the various submenus. Press "Enter" to open the
desired menu. The product name and the O
product. The menu is exited by either selecting the "Store product" option to save the
changes for each product or by selecting the "Main menu" option to keep the default
value.
PRODUCT
3.6.1
You can browse through the 10 products and select a product by pressing "Enter".
While browsing through the products, the settings for the product selected at that moment will be
displayed.
You can enter a product name consisting of a maximum of 10 characters. The cursor will move to
the next character every time "Enter" is pressed. Once a character has been selected, press the
arrow buttons to scroll through the characters. Once the desired character is displayed, press
"Enter" to save that character and move to the next character.
The "Product" menu will be displayed again once the last character has been confirmed.
O
SAMPLING TIME
3.6.2
2
The time interval of the O
be set for a continuous O
adjustment range is 2 to 999 seconds. The measured O
the software program using the same interval.
Waltron User Manual
9065C Portable Luminescent Dissolved Oxygen Analyzer
and temperature values are displayed during every measurement. The arrow
2
measurement and the logging of the measurements in the memory can
2
measurement. The default O
2
sampling time can be defined for each
2
sampling time is 10 seconds and the
2
values are logged on a PC by means of
2
Installation
18
Advertisement
Table of Contents
