Table of Contents
Advertisement
There is a bar at the bottom of the display that gives the actual measurement values (see Fig. 4.3
and Fig. 4.4).
BUSY
MEASURING
PROGRESS:
T: 22.2
Figure 4.2: 9065C display during a measurement.
BUSY
MEASURING
PROGRESS:
001
Figure 4.3: 9065C display during a measurement.
The bar at the top indicates the battery status. If this bar flashes, you can only carry out a few
more measurements with the 9065C before the battery needs recharging.
MEASUREMENT CHOICE
4.3
You can select one of the following measurement programs from the "Measurement choice"
menu:
1. Individual O
2. O
continuous measurement.
2
These measurement programs are explained in more detail in the following sections.
The "Measurement choice" menu is accessed as follows:
1. Press "Enter" until the Waltron logo is displayed.
Besides the software version number, the 9065C serial number and the oxygen
measurement range are also displayed.
2. Press "Enter" again.
The main menu will now be displayed.
3. Use the arrow buttons to select the "Measurement choice" menu and press "Enter" to
open the menu.
4. Use the arrow buttons to select one of the measuring programs that are displayed.
Waltron User Manual
9065C Portable Luminescent Dissolved Oxygen Analyzer
O
: 90
2
T: 22.2
measurement.
2
Battery status
Progress of the measurement
Temperature and O
2
Battery status
Progress of the measurement
Temperature
Measurement number
Operation
22
Advertisement
Table of Contents
