Table of Contents
Advertisement
Installation
3 INSTALLATION
CONTENT OF THE DELIVERY
3.1
The 9065C is calibrated, checked and tested by Waltron before shipment and the instrument is,
therefore, ready for immediate use. It is not necessary to calibrate the instrument again before it is
used for the first time.
Check whether the delivery is complete and undamaged. If the delivery is incomplete or
damaged, contact Waltron or the Waltron representative in your region immediately (see
www.waltron.net). Always state the serial number, the order number or the invoice number (as
given by Waltron) of the 9065C in all correspondence.
NOTE:
The delivery includes:
The 9065C
A service set (with tools, replacement parts and a wide range of voltage adaptors)
A set of hoses
The PC communication program "DGM utility" on a CD-ROM
An RS-232 communication cable (1.5 meters)
Two ID keys for users (optional)
Two ID keys for locations (optional)
An instruction manual
Optional extras that can be ordered:
A quick-charger for users who wish to quickly charge the battery pack. The battery pack
must be disconnected from the 9065C while it is being charged.
See Appendix C for a list of other spare parts and components.
PRE-INSTALLATION
3.2
15
Before using the instrument, you must make sure the
instrument is complete and no parts are missing.
Make sure the 9065C is not connected to a sampling point
that produces pressures or pressure peaks greater than 10
bar.
9065C Portable Luminescent Dissolved Oxygen Analyzer
Waltron User Manual
Advertisement
Table of Contents
