Table of Contents
Advertisement
INSTALLATION
3.3
Connect the hoses as described below.
1. Lubricate the O-rings of the hose socket with a small amount of silicon grease (from the
service set).
2. Slide the hose connections over the hose sockets of the 9065C until they click into place
and then pull them back until they become locked.
UNITS
3.4
The units used by the 9065C for the O
The "Unit" menu is accessed as follows:
1. Press "Enter" for 3 seconds until the Waltron logo is displayed.
2. Besides the software version number, the 9065C serial number is also displayed.
3. Press "Enter" again.
4. The main menu will now be displayed.
5. Use the arrow buttons to select the "Configuration" menu and then press "Enter" to open
the menu.
Waltron User Manual
9065C Portable Luminescent Dissolved Oxygen Analyzer
Figure 3.1: O-Ring installation
content and the temperature can be changed.
2
Installation
16
Advertisement
Table of Contents
