Table of Contents
Advertisement
Installation
LANGUAGE
3.7
The language is changed as follows:
1. Press "Enter" until the Waltron logo is displayed.
2. Press "Enter" again.
3. The main menu will now be displayed.
4. Use the arrow buttons to select the "Configuration" menu and then press "Enter" to open
the menu.
5. Use the arrows buttons to select the "Language" menu and then press "Enter" to open the
menu.
6. You can use the arrow buttons to select Nederlands, Deutsch, English, Francais or
Español as the language.
7. Press "Enter" to select a language. The main menu will then be displayed.
ID SYSTEM/PASSWORD
3.8
PASSWORD
3.8.1
The 9065C has two settings at the user level:
1. "Master User: Present": All the settings in the 9065C can be changed without limitation.
(DEFAULT setting)
2. "Master User: Absent": You can only select the predefined products, change the time and
the display contrast and delete the last measurement. You can view all the other menus
but cannot make changes in them.
To switch between the "Master User" options (from "Present" to "Absent" and vice versa), you
must enter a password (the default password is 0000).
If the "Master User" option is set to "Present", then the additional "Password" menu
option is displayed with a masked password (****).
If you wish to change the password, use the arrow buttons to select the "Password" menu
and press "Enter".
Enter the old password first and then enter a new 4-digit password. To do so, use the
arrow buttons to change the numbers and press "Enter" to move to the next digit.
NOTE:
You can enter the "Master User" password here:
Password:
19
If you change the password, remember it or write it in the
space below.
If you lose the password, contact your Waltron
representative or contact Waltron directly.
9065C Portable Luminescent Dissolved Oxygen Analyzer
Waltron User Manual
Advertisement
Table of Contents
