Deactivating, Storage And Transport; Deactivating; Storage; Transport - Waltron 9065 User Manual

9 DEACTIVATING, STORAGE AND TRANSPORT

DEACTIVATING

9.1
If the 9065 is no longer used, the components must be sent to an appropriate waste disposal
organization or the entire unit can be returned to Waltron. The materials from which the main
components are made are given below:

Control box: ABS housing, various prints.

Sensor: stainless steel, oxygen print, POM.

STORAGE

9.2
The instrument must be stored in a dry location and be protected against mechanical and/or
chemical damage. If the 9065 is not going to be used for a long time, the instrument must be
thoroughly rinsed with water to clean it. The instrument must then be emptied, flushed with air
and dried.
The 9065 must be completely empty (dry) when it is stored away.

TRANSPORT

9.3
When the 9065 is transported, the transmitter display must be protected against direct mechanical
impact. It is recommended to save the packaging materials provided by Waltron for reuse
whenever the 9065 is transported.
The 9065 must be completely empty (dry) when it is transported.
Waltron User Manual
9065 Luminescent Dissolved Oxygen Analyzer
Deactivating, Storage and Transport
44