Volume - Datavideo AD-300 Instruction Manual

Volume

VOLUME sets the audio I/O volumes. Follow the steps outlined below to adjust the
volume of the respective audio channels.

Press the MENU SETTING knob to access the system configuration menu.

Because VOLUME is the first item of the main menu, so press the MENU SETTING
knob again to access the VOLUME sub menu which allows you to set the volumes
of five audio inputs and the audio output listed as follows:
-
RCA-L
-
RCA-R
-
XLR-1
-
XLR-2
-
XLR-3
-
OUTPUT

Press the MENU SETTING knob to select the audio input or output.

Rotate the MENU SETTING knob to adjust the volume of the selected audio input
(-80 – +12 dB) or output (-80 – +12 dB).

Select ESCAPE to exit and return to main menu.
Gain Limit allows you to set the maximum gain of the five audio inputs, the audio
output and the headphone volume.
Follow the steps below to select the maximum gain of the I/O channels.

Press the MENU SETTING knob to access the system configuration menu.

Rotate the MENU SETTING knob to GAIN LIMIT, then press the MENU SETTING
knob again to access the GAIN LIMIT sub menu which allows you to select the
maximum gain of five audio inputs, one audio output and the headphone output
listed as follows:
-
RCA-L
-
RCA-R
-
XLR-1
-
XLR-2
-
XLR-3
-
OUTPUT
-
MONITOR

Rotate the MENU SETTING knob to the desired audio channel and press the knob
to select.
17