Self-Test Wiring - ICP DAS USA tDS-700 Series Quick Start Manual

4

Self-Test Wiring


RS-232 Wiring: Connect the RxD to
the TxD pins (The tDS-712 is used as
an example.)
Note: While using RS-485 modules (e.g., tDS-715), you should wire the Data1+ with
Data2+ signals, and wire the Data1- with Data2- signals for self-test.
Then open the first two COM Ports, send data to one and receive data from the other.
tDS-700 series Tiny Device Server with PoE - QuickStart (Aug/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com

| 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
RS-422 Wiring: Connect the RxD1- to the
TxD1- pins and connect the RxD1+ to the
TxD1+ pins (The tDS-715 is used as an
example.)
3