Page 1
Multiplayer CDJ-2000NXS2 CDJ-TOUR1 djay PRO Connection Guide Mar.2017...
Page 2
Introduction The CDJ-2000NXS2/ CDJ-TOUR1 is equipped with an interface that enables high-precision control of djay PRO DJ software developed by algoriddim GmbH. Connecting these players to djay PRO, you will be able to control the application without using a control disc.
Page 3
Connection procedures There are three ways to connect multiplayers to your computer. 1. Using multiplayers as audio interface Connect multiplayers to your computer using a USB cable per multiplayer* *1. Up to 4 multiplayers can be connected to control djay PRO.
2. Using equipment supporting djay PRO (mixer, etc.) as audio interface Connect multiplayers to your computer using a USB cable per multiplayer* Connect equipment supporting djay PRO* (mixer, etc.) to your computer using a USB cable. *1. Up to 4 multiplayers can be connected to control djay PRO. *2.
Page 5
*1 See the Operating Instructions of connected equipment for details on PRO DJ LINK. You can download the Operating Instructions from the Pioneer DJ support page (http://www.pioneerdj.com/en/support/). *2 Use a network switching hub if necessary depending on the connected equipment.
Page 6
Using multiplayers as djay PRO controllers Once the connections have been made, turn on the power of all the units. Then, follow the instructions below to set up each multiplayer. Press the [LINK] button on the multiplayer and select [USB MIDI] for the [CONTROL MODE]. Press the rotary selector to fix it.
Page 7
Pioneer DJ is a trademark of the PIONEER CORPORATION and is used under license. djay PRO is a registered trademark of algoriddim GmbH. The names of companies and products mentioned herein are trademarks or registered trademarks of their respective owners.