Page 1
Multiplayer CDJ-2000NXS2 Serato DJ Connection Guide Dec.2016...
Page 2
Introduction The CDJ-2000NXS2 is equipped with an interface that enables high-precision control for Serato DJ software manufactured by Serato Audio Research Ltd (Serato). Connecting these products to Serato DJ provides control of the application without using a control CD. This connection guide explains the basic operations when the products are connected to Serato...
Page 3
Connecting to Serato DJ Preparations To connect to Serato DJ, update the firmware of your multiplayer to the latest version. Please see our support page (http://www.pioneerdj.com/support/) for details of firmware upgrades. Update Serato DJ to the latest version. Please see the Serato website (https://serato.com/) for details on system requirements.
Connection Procedures Connect the multiplayer (or multiplayers*, if more than one are to be connected) to your PC/Mac using a USB cable per multiplayer. *Up to 4 multiplayers can be connected to SERATO DJ.
Page 5
Using the Multiplayers as Serato DJ Controllers Turn on the power of all the units once the connections have been made. Then, follow the instructions below to set up each multiplayer. Press the [LINK] button on the multiplayer and then select [USB MIDI] for the [CONTROL MODE].
Page 6
Pioneer DJ is a trademark of the PIONEER CORPORATION and is used under license. Serato DJ is a registered trademark of Serato Audio Research Ltd. The names of companies and products mentioned herein are trademarks or registered trademarks of their respective owners.