PIONEER DJ AlphaTheta CDJ-3000 Service Manual page 47

5
6.2 JOG LCD CALIBRATION
! The displacement between JOG LCD and LCD Sheet is corrected in this mode.
! Touch display
[Operators List]
1 [TRACK SEARCH o] button
[TRACK SEARCH p] button
2 [SEARCH m] button
[SEARCH n] button
3 [PLAY/PAUSE f], [CUE] button
4 [TEMPO RESET] button
[Initial state]
All LEDs flash. The following is displayed on the JOG display
+ If this mode has been performed in the past, it will be displayed in the state saved previously.
[Confirmation Procedure]
(1) Press 4[TEMPO RESET] button.
(2) Press buttons 1 and 2 to move the black line. Refer to [Operators List] for the direction of movement.
The movable range is up to 4 pixels in each direction from the initial state.
(3) Press 3[PLAY/PAUSE f] and [CUE] buttons simultaneously, and save the result.
If the saving is completed, the LEDs of 1, 2 and 3 buttons light off.
Press 4[TEMPO RESET] button, Calibration starts again. (LEDs of 1, 2 and 3 buttons light on again)
+ When restarting the Calibration, it starts from the last saved state. It is the same about the position of the black line of the JOG display.
[Warning display when Calibration does not start]
If Calibration does not perform, JOG ring flashes in VARIOUS INFORMATION mode.
Refer to "6.1 SERVICE MODE_VARIOUS INFORMATION [Mode 1/10]".
[Confirmation method in this mode]
If LCD Calibration does not perform: JOG ring flashes (MAX brightness d OFF d MAX brightness...)
If LCD Calibration performed: JOG ring lights off
5
6
: Move the black line by one pixel to the left.
: Move the black line by one pixel to the right.
: Move the black line 1 pixel upward.
: Move black line 1 pixel downward.
: Save by pressing its simultaneously.
: Calibration starts again by pressing it.
! JOG display
-1, +2
6
7
1
2
3
The back screen color is white.
The border line color is black.
The moveable range is ±4.
CDJ-3000
7
8
-1, +2
4
JOG display JOG display
47
8
A
B
C
D
E
F