NordicTrack T 8.0 User Manual page 9

5. With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the
Frame (46) so that the treadmill is more stable;
do not fully fold the Frame yet.
Attach a Wheel (91) to the Base (92) with a 3/8"
x 2" Bolt (8) and a 3/8" Nut (9). Do not over-
tighten the Nut; the Wheel must turn freely.
Press a Base Cap (86) into the Base (92).
6. Hold the Left Upright (81) against the Base (92).
Insert two 3/8" x 4 1/4" Screws (6) with two 3/8"
Star Washers (10) and a 3/8" x 1 1/2" Screw (7)
with a 3/8" Star Washer (10) into the Left
Upright.
Partially tighten the 3/8" x 4 1/4" Screws (6) until
the heads of the Screws touch the Left Upright
(81); do not fully tighten the Screws yet.
Next, partially tighten the 3/8" x 1 1/2" Screw
(7).
With the help of a second person, tip the tread-
mill so that the Base (92) is flat on the floor.
5
86
6
6
10
92
9
8
92
91
9
7
81
10
46