NordicTrack T 8.0 User Manual page 14

17. Remove the thin sheet of plastic from the face of
the Console (98). Carefully press the tabs on
the Book Holder (107) into the slots in the
Console until they snap into place.
18. Raise the Frame (46) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (45) so that the large
barrel and the latch knob are oriented as shown.
Attach the Latch Bracket (44) and Storage Latch
(45) to the Base (92) with two 3/8" x 2" Bolts (8)
and two 3/8" Nuts (9).
Attach the upper end of the Storage Latch (45)
to the bracket on the Frame (46) with a 3/8" x 2"
Bolt (8) and a 3/8" Nut (9). Note: It may be nec-
essary to move the Frame back and forth to
align the Storage Latch with the bracket.
Lower the Frame (46) (see HOW TO LOWER
THE TREADMILL FOR USE on page 25).
19. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is
used to adjust the walking belt (see pages 27 and 28).
17
98
18
Latch Knob
14
107
Tab
Slot
46
9
8
45
Large
Barrel
44
92
8
9