Table of Contents
Advertisement
ATTACHING THE ACCESSORIES TO THE HIGH
PULLEY STATION
To use the high pulley station, first place the desired
weights on the weight carriage (see ADDING
WEIGHTS TO THE BARBELL OR THE WEIGHT
CARRIAGE on page 18). Next, attach the Pulley
Handles (25) to the High Cable (53) with the clip on
the Cable Stop (103). For some exercises, the Chain
(98) should be attached between the Pulley Handle
and the Cable with a Cable Clip (73). Adjust the
length of the Chain between the Pulley Handle
and the Cable so that the Pulley Handle is in the
correct starting position for the exercise to be
performed.
ATTACHING THE ACCESSORIES TO THE LOW
PULLEY STATION
To use the low pulley station, first place the desired
weights on the weight carriage (see ADDING
WEIGHTS TO THE BARBELL OR THE WEIGHT
CARRIAGE on page 18). Next, attach a Pulley
Handle (25) to the Low Cable (52) with the clip on the
Cable Stop (103).
See the inset drawing. The Ankle Strap (26) can be
attached to the Low Cable (52) in the same way. For
some exercises, the Chain (98) should be attached
between the Pulley Handle (25) or the Ankle Strap
and the Cable with a Cable Clip (73). Adjust the
length of the Chain between the Pulley Handle or
Ankle Strap and the Cable so that the Pulley
Handle or Ankle Strap is in the correct starting
position for the exercise to be performed.
USING THE LOCKING BAR
Grip the Locking Bar (19) with both hands. Turn the
Locking Bar until the two hooks disengage the slots in
the Left and Right Uprights (1, 2). Raise or lower the
Locking Bar to a new position and turn it until the
hooks engage slots in the Uprights.
All manuals and user guides at all-guides.com
17
53
98
103
Clip
73
25
52
25
103
2
Hook
53
103
Clip
25
73
98
26
1
19
Advertisement
Table of Contents
