Table of Contents
Advertisement
6. Attach the Seat (116) to the Bench Frame (107)
with two M6 x 65mm Screws (120) and two M6
Washers (61).
7. Grease the barrel of an M10 x 107mm Bolt Set
(106). Attach the Leg Lever (110) to the Front Leg
(109) with the Bolt Set. Make sure that the bar-
rel of the Bolt Set is inserted through both
sides of the bracket on the Leg Lever.
Then, slide the Weight Spacer (125) onto the post
on the Leg Lever (110). Next, tighten the Weight
Tube (59) onto the post.
8. Insert the Long Pad Tube (130) into the Front Leg
(109). Slide two Foam Pads (128) onto the Long
Pad Tube. Then, press a 19mm Round Cap (134)
into each Foam Pad.
All manuals and user guides at all-guides.com
8
6
116
120
7
106
110
109
59
125
8
134
128
109
107
61
106
130
128
134
Advertisement
Table of Contents
