iFIT WEIDERBLACK WBBE14908.0 User Manual page 16

USING THE LEG LEVER
To use the Leg Lever (110), slide the desired weights
(not included) onto the Weight Tube (59). Secure the
weights with a Spring Collar (27). You can store
unused weights on the Weight Tubes (not shown) on
the Uprights (not shown).
WARNING:
150 lbs. (68 kg) on the Leg Lever (110). Always
secure weights with a Spring Collar (27).
USING THE BARBELL RESTS AND THE BARBELL
SPOTTERS
Before using a separate barbell (not included), set the
Barbell Spotters (29) at the lowest point to which you
want your barbell to move. To do this, see step 24 on
page 14.
Adjust the two Barbell Rests (30) in the same way.
WARNING:
Barbell Spotters (29) and both Barbell Rests
(30) to the same height.
MOVING THE BARBELL SPOTTERS
To move the right Weight Bar Spotter (23), use the
indicated hole to pull the right Spotter Hook (24) out
of the slot in the Right Upright (2). Raise or lower the
Weight Bar Spotter to a new position, and pivot the
right Spotter Hook into a slot in the Right Upright.
Note: Always start an exercise with the Weight
Bar Spotters positioned at the lowest point to
which you want the Weight Bar (18) to move dur-
ing the exercise.
Adjust the left Weight Bar Spotter (23) and the left
Spotter Hook (24) in the same way.
WARNING:
Weight Bar Spotters (23) at the same height.
All manuals and user guides at all-guides.com
Do not put more than
Always adjust both
Always set both
110
Weight
59
27
30
29
2
Hole
24
23
16
30
29
18
1
24
23