Table of Contents
Advertisement
12
OPERATION & FEATURES
Using the light fixture tool provided, lineup each
corner of the fixture tool in parallel with the notches
located on the outer ring of the light fixture. Twist
the outer ring counter clockwise to unlock the
light fixture housing.
WARNING!!!
Check to make sure all power sources are disconnected
before starting any troubleshooting. Safety gloves and
glasses should be worn when working on the unit. Serious
injury or death may occur if safety precautions are not
followed.
Step 1
Twist light ring counter-
clock wise to unlock.
Step 2
Pull the light upward.
Step 3
Push light to left or
right side.
Step 4
Remove the light by turning
light counter-clock wise
Light Fixture Tool
13
OPERATION & FEATURES
4.
CHARCOAL FILTERS
**DO NOT WASH CHARCOAL FILTERS! IT WILL DISSOLVE!!**
a.
Insert the charcoal filters on each side of the motor on top of the white
protective grill as shown below. (Fig. 3a)
b.
Rotate the charcoal filters in a counter-clockwise motion until you hear a
click. (Fig. 3b)
c.
Installation is complete after the charcoal filters are secured in place.
Fig. 3a
Fig. 3b
Advertisement
Table of Contents
