Operation & Features - Windster WS-69TB36 User Manual

OPERATION & FEATURES
1.
EASY ACCESS KNOB CONTROL
a.
b.
2.
BAFFLE FILTERS
a.
b.
3.
REMOVING THE BAFFLE FILTERS
4.
REPLACING LIGHT SET
*Warning: To avoid electrical shock, replacement GU10 bulbs MUST
contain UL or CSA certification.
*NOTE: BE SURE THE LIGHTS ARE NOT HOT*
a.
b.
c.
d.
e.
f.
g.
h.
OPERATION & FEATURES
Knob 1 – Light ON / OFF
Knob 2 – Speed
i. 1 – Low speed
ii. 2 – Medium speed
iii. 3 – High speed
(2) 14-3/8" x 12-3/4" baffle filters and (2) fillers (30" / 36")
(3) 14-3/8" x 12-3/4" baffle filters and (2) fillers (42" / 48")
1
Slide the baffle filter into the hood.
2
Push the baffle filter upward.
3
Slide the baffle filter toward you.
4
Pull the end of the baffle filter downward.
5
Fit into place.
Electrical Shock Hazard
Use max 35 W/JDR16, GU10 twist and lock base lamp
Locate metal rectangular piece included in package.
Place metal piece against outer light ring and unscrew counter clock wise.
Outer light ring should drop down along with the light bulb.
Slightly pull the light away from the ring.
Move light to left or right side of the ring.
Twist light bulb counter clock wise to release from socket.
Replace light bulb.
9