OPERATION & FEATURES
Using the light fixture tool provided, lineup each
corner of the fixture tool in parallel with the notches
located on the outer ring of the light fixture. Twist
the outer ring counter clockwise to unlock the
light fixture housing.
WARNING!!!
Check to make sure all power sources are disconnected
before starting any troubleshooting. Safety gloves and
glasses should be worn when working on the unit. Serious
injury or death may occur if safety precautions are not
followed.
Step 1
Twist light ring counter-
clock wise to unlock.
Step 2
Pull the light upward.
Step 3
Push light to left or
right side.
Step 4
Remove the light by turning
light counter-clock wise
14
Light Fixture Tool
15
OPERATION & FEATURES
5.
PUTTING IN THE OIL TRAY AND BAFFLE FILTERS
a.
Insert the oil tray into the unit at an angle. (Fig. 3a)
○ 1
b.
Slide the baffle filter into
the hood.
○ 2
Push the baffle filter
upward.
○ 3
c.
Slide the baffle filter
toward you.
○ 4
Pull the end of the
baffle filter downward.
d. ○ 5
Fit into place.