Locking/Unlocking - Permobil K450 Owner's Manual

Power wheelchair
Hide thumbs Also See for K450:
Table of Contents

Advertisement

Permobil K450 Owner´s manual
Control panel
Locking/unlocking the wheelchair
The control system can be locked in two different ways. These are using a key
sequence on the keypad or with a physical key. Which method is applied
depends on how the system has been programmed.
Locking with the keypad:
Press and hold down the on/off key while the control system is active.
After 1 second, the control system emits a beep. Release the on/off key.
Move the joystick forwards until the control system emits a beep.
Move the joystick backwards until the control system emits a beep.
Release the joystick. You will hear a long beep.
The wheelchair is now locked.
The following screen is displayed:
Unlocking:
Press the on/off key if the control system is switched off.
Move the joystick forwards until the control system emits a beep.
Move the joystick backwards until the control system emits a beep.
Release the joystick. You will hear a long beep.
The wheelchair is now unlocked.
36
Design and function

Advertisement

Table of Contents
loading

Table of Contents