Permobil K450 Owner's Manual page 35

Permobil K450 Owner´s manual
Control panel
Fault
Motor temperature
Control system temperature
Wait
Emergency stop
The control system can detect a large number of
faults. When the system has detected a fault that is
not serious enough to cause a stoppage, this symbol
is displayed.
This symbol is displayed when the control system
has intentionally reduced the power supply to the
motors to protect them against overheating.
This symbol is displayed when the control system
has intentionally reduced its own power supply to
protect itself against overheating.
This symbol is displayed when the control system
switches between different stages. For example, it
may be displayed when you enter programming
mode. The symbol is animated so that you can see
the sand running through the hourglass.
If the control system has been programmed for
locked operation or automatic adjustment of the
seat, an emergency stop key is normally connected
via the socket for an external profile key. If the emer-
gency stop key is used or disconnected, this symbol
flashes.
35
Design and function