Permobil K450 Owner's Manual page 47

Permobil K450 Owner´s manual
Symbols on the ICS Control panel
Memory function
The control panel has a built-in memory with three storage loca-
tions. Each location can store all the electric settings of the seat.
Save setting
Adjust the seat to the position you want to save.
- Activate the memory function by holding down the memory button(8) for 2
seconds, see the picture. The symbol will flash in green when the memory
function is activated.
- Hold down the button for the memory function you want (5, 6 or 7) for three
seconds to store the setting of the seat, see the picture.
- The symbol opposite the current memory function will light up in red and the
control panel will give a short acoustic signal when the setting has been
saved.
- Return to the standard functions on the control panel by pressing the mem-
ory button(8), see the picture.
Recall the setting
- Activate the memory function by holding down the memory button(8) for 2
seconds, see the picture. The symbol will flash in green when the memory
function is activated.
- Hold down the button for the memory function you want (1, 2 or 3) for three
seconds, and the seat will be moved to the position stored earlier, see the
picture. For reasons of safety, the button must be held down until the seat
is fully adjusted in the required position.
- When the seat has reached the saved
position, the seat adjustment device
will stop, the symbol beside the stor-
age location will light up in green, and
the control panel will give a short
acoustic signal.
- Return to the standard functions on
the control panel by pressing the
memory button(8), see the picture.
1
5
The control panel
memory function.
47
Design and function
4
2
3
8
6
7