Table of Contents
Advertisement
4x1 4K60 HDMI Switch with Control and Audio Extraction
4.2 Web GUI Operation
As shipped from the factory (or after factory default reset), the SW-HD-4A IP address is set for
a static IP address of 192.168.0.88 and a static GW (Gateway) address of 192.168.0.1.
Use RS-232 terminal software to find the currently assigned IP and GW addresses (and to
also set them as desired).
SW-HD-4A internal Web pages (Web GUI)
o Access the SW-HD-4A Webpage with any compatible browser at the IP address
found above.
The browser will open with the devices Switch Info tab displayed.
Click the tabs at the top of the screen to access the other tabs.
o Switch Info Tab
INPUT 1 thru INPUT 4
• Shows the currently selected HDMI input.
• Click the desired INPUT button to select that HDMI input.
The following information is also shown
• HDMI Input Status (ON or OFF)
• HDMI HDCP Input State (None, HDCP 1.4 or HDCP 2.2)
• Resolution
• Pixel Clock
• Output Color Space
• Color Bit Depth
• EDID presented to the HDMI Input based on the configuration setting.
10
Advertisement
Table of Contents
