Sea Eagle Stealth Stalker STS10 Instruction & Owner's Manual page 14

StealthStalker | DEFLATION
Place the inflated boat
onto its Boat Bag. Line up
the front (bow) with the
edge of the bag where the
end flap is attached
To deflate, push down on
the valve stem and
quarter turn it to the right
or left. The stem will stay
in the down position,
allowing the air to escape.
Caution: Air escapes
with force, do not place
face directly over valve.
Remove the canopy, oars,
and Scotty accessories. As
the boat deflates, remove
the motor mount and side
stringers.
Pull the floorboards up
where they meet in the
middle.
Remove the floorboards.
Fold one side of the boat
onto the floor. Press down
on the boat to force air out.
Fold the second side on
top of the first and force air
out. The boat will be long
and narrow with the front
of the boat laying on the
main part of the bag.
Make a crease in the boat
just in front of the side rod
holders, about 40 inches
from the back end. Fold the
back of the boat on top of
the sides.
Make a second fold so the
boat is over the center of
the bag
Pull the end flaps on top
of folded boat. Run strap
through both loops, then
back through the first loop
and pull tight. Repeat with
second strap.
13