Related Manuals for Sea Eagle PackFish 7
Summary of Contents for Sea Eagle PackFish 7
- Page 1 PackFish 7 Instructions & Owner’s Manual For video instructions visit, SeaEagle.com/Instructions Sea Eagle Boats, Inc. 19 N. Columbia Street, Suite 1 Port Jeff erson, NY 11777 1-800-748-8066 March 2017...
-
Page 2: Manufacturer's Certifications
Sea Eagle must inspect equipment in order to determine if there is a defect. In the event that an item must be shipped back to us, Sea Eagle will only reimburse the standard return shipping charge through FedEx, UPS, or U.S.P.S. - Page 3 Most states require you to register your boat if you are using a motor. (Please note, the Sea Eagle PackFish 7 is rated for use with a 1 hp motor by the NMMA. However, there is currently no provision for a motor mount.) Upon registration it may be required to provide the Manufacturer’s Statement of Origin.
- Page 4 Sea Eagle recommended pumps. • DO NOT use your Sea Eagle Boat as a personal flotation device as they are not rated for that use. • DO NOT sleep inside of your Sea Eagle while on the water.
- Page 6 Eagle Boats. Either of Move the valve bases the two Air Valve to the openings in the Adapters work with the cover. PackFish 7 and infl atable seats. Stretch the valve Insert the proper retainer ring over the adapter into the end of valve base.
- Page 7 Please note the valve base tightly and unscrew adapters and black the cap. tube that come with the MB-80 are not necessary for Sea Eagle boats. Open the cap of the air valve and twist on or insert the adapter. Battery Connector Pump until firm &...
- Page 8 Insert shaft in oarlock boat but do not cover ring. the rod holders. (Holes in the board are not used with PackFish 7.) Insert hose into the Slide the blade onto second chamber and the shaft and adjust inflate until firm. This...
- Page 9 Unscrew oarlocks and For quick access, with secure them in tool strap. the oar in the oarlock, secure the shaft with the hook & loop strap. Due to the bulk and weight of the boat and accessories, use caution not to lose balance or overexert yourself.
-
Page 10: Troubleshooting
Seam leaks are the least likely cause of a leak. If a seam STORAGE leak if found, contact Sea Eagle customer service. Take photos of the problem if possible. PVC can become brittle in cold temperatures. To avoid... - Page 11 TROUBLE SHOOTING | Retainer Ring To inspect the air bladder, deflate the boat and pull the bladder out Retainer Ring the zipper opening. The valve base has a groove for the retainer ring. Check that the retainer ring is in its groove.
- Page 12 TROUBLE SHOOTING | Repairs Thoroughly clean and Even though your Sea Eagle is very rugged and tough, dry the area you may still experience the occasional puncture. surrounding the leak. Fortunately most repairs are fairly easy and only take a Circle the leak to few minutes.
- Page 13 Optional easy portage. We off er a wide variety of accessories to use with Squid Anchor your Sea Eagle. The Squid Anchor gets its heft from up to 14 lbs. of river sand, stones, rocks or gravel provided by nature.