Sea Eagle FoldCat 375fc Instructions And Owner's Manual
Hide thumbs
Also See for FoldCat 375fc:
- Instructions and owner's manual (10 pages) ,
- Instruction & owner's manual (13 pages)
Related Manuals for Sea Eagle FoldCat 375fc
Summary of Contents for Sea Eagle FoldCat 375fc
- Page 1 Sea Eagle FoldCat 375fc & 440fc ® Instructions and Owner’s Manual April 2009 19 N. Columbia St., Suite 1, Port Jefferson, NY 11777 (631) 473 7308...
- Page 2 ASSEMBLY Recessed On-Way Valve Adapter & Valve Tool. Sea Eagle FoldCat 375fc Pro Angler’s Package includes: The FoldCat 375fc & 440fc require one time assembly of optiona adapters for rod holders and quick release swivel - 375fc FoldCat inflatable hull seat mounts.
- Page 3 Withdraw the adapter from Also make sure that the underbars are aligned properly the valve and close the valve cap. Inflated FoldCat 375fc along the length of the pontoon. The aluminum underbars in should look like this.
- Page 4 (for inflation). The opening on the other side of the pump like our FoldCat 375fc. It has a with an arrow pointing inward is for deflation, which is not set of alligator clips to hook on to required for our boats.
- Page 5 Please note, for disassembly it is very easy to detach the swivel seat or the pedestal from the quick release seatmount by sliding them out while lifting up the spring loaded quick release lever mechanism on the swivel seat mount with your finger as shown below.
- Page 6 place holders in the adapters as shown. Motormount Parts for the motormount include wooden motormount plate, 2 aluminum L-brackets, four bolts, 4 washers and 4 knurled nuts. For disassembly, you only need to detach the rod holders from the flush mount adapters. This rearmost aluminum bench has 2 pre-drilled 3/8"...
- Page 7 Insert the canopy rods with preassembled pins into the raised oar lock rod bases as shown. Please note, after first time assembly of the FoldCat 375fc or 440fc, for disassembly all you have to do is deflate the air chambers, remove the underbars, swivel seats, rodholders, oars and unscrew the oarlocks.
- Page 8 Attach the other two black straps to the fabric portion of the two rear handles as shown in the stern as shown. Casting Bar Install the padded covers - Install only the large cover on the 375fc. Install the 2 small covers on either side the large cover for the FoldCat 440fc.
- Page 9 Storage Trace the holes for the screws on the aluminum bench The Sea Eagle FoldCats can be stored inflated for an with a pencil. indefinite period of time as long as the temperature remains warmer than -20° fahrenheit. For outdoor storage, cover the FoldCat with a tarp and keep it off the ground.
-
Page 10: Troubleshooting
Troubleshooting Thoroughly clean the area surrounding the Leakage of air: If your boat appears a bit soft, it might not leak to remove any dirt be because of a leak. If the boat was inflated late in the day or grime. with 90 degree air, that air might cool 20 degrees overnight. - Page 11 Using longer oars that crossover and/or oars that feather takes practice. You may want to consult some The Sea Eagle FoldCat 375fc or 440fc is a very light weight books on rowing before before considering these future catamaran. Since only the pontoons are in touch with water, options.
- Page 12 makes perfect, it makes safe. Please note, when pulling your oars through the water you should try to keep the blades fully immersed, but as close to the surface as possible. This will give you greater rowing leverage. You should continually practice your rowing strokes, trying to make them as fluid and smooth as possible.