Advertisement
Quick Links
Sea Eagle Transom Boats
8.10YT, 10.6SR, 12.6SR & 14SR
Instruction & Owner's Manual
VIDEO
INSTRUCTIONS
For video instructions visit SeaEagle.com/Instructions
Sea Eagle Boats Inc.
19 N. Columbia Street, Suite 1
scan this code
Port Jefferson, NY 11777
or visit
1-800-748-8066
http://sea.gl/vitr
January 2013
Advertisement
Related Manuals for Sea Eagle 8.10YT
Summary of Contents for Sea Eagle 8.10YT
- Page 1 Sea Eagle Transom Boats 8.10YT, 10.6SR, 12.6SR & 14SR Instruction & Owner’s Manual VIDEO INSTRUCTIONS For video instructions visit SeaEagle.com/Instructions Sea Eagle Boats Inc. 19 N. Columbia Street, Suite 1 scan this code Port Jefferson, NY 11777 or visit 1-800-748-8066 http://sea.gl/vitr...
- Page 2 Sea Eagle must inspect equipment in order to determine if there is a defect. In the event that an item must be shipped back to us for inspection, Sea Eagle will only reimburse the standard return shipping charge through FedEx, UPS or the U.S.
- Page 3 Towing In order to tow your Sea Eagle Transom Boat as a tender, tie the provided tow line to each D-Ring on the outside bow of your boat and then pull the center of the tow line through the bow carry handle. This method is described as a bridle sys- tem and will distribute the force of towing across the hull.
- Page 4 • DO NOT use compressors, co2 or compressed air for inflation, only use Sea Eagle recommended pumps. • DO NOT use your Sea Eagle Boat as a personal flotation device as they are designed for leisure/recreation in mind. • DO NOT sleep inside of your Sea Eagle while on the water.
- Page 5 Inflation Valves & Pumps Inflation Valves & Pumps Recessed Air Valves A-50 (high pressure) Remove the cap and When the black cap is press and turn the valve removed from the cen- stem counterclockwise ter of the A-50, the so that the stem is in pump is in the high the UP position.
- Page 6 3.2 PSI which is The BTP Turbo electric the operating pressure pump comes complete of your Sea Eagle. PSI with a nylon shoulder is marked in red on the carry bag, 12V DC dial. Never turn the dial...
-
Page 7: Assembly & Inflation
(usually around 50 PSI) fuel tank. can easily harm your Sea Eagle which works at a much lower pres- sure of 3.2 PSI. For this reason we recommend only using Sea Eagle... - Page 8 Qty 2. STR14L Stringer (124 cm/49”) Qty 2: STR14S Stringer (80 cm/31.5”) Sea Eagle’s floorboard and stringer system is designed to be snug inside the boat. Although installation can be done by one person, it also requires some patience and practice.
- Page 9 CAUTION! Insert the FB-3 so that it Please do not proceed meshes with the FB-4 with bare feet and make and overlaps the FB-2. sure to keep fingers and Lift the ends of the FB-2 toes out of the way so and FB-3 and connect that they do not get them to form an in-...
- Page 10 Place the longer With the floorboard in- stringer in the rear of stalled and the seat in the boat between the place, you are now hull and the notched ready to fully inflate the edge of the floorboards main air chambers of with the groove on the the boat to 100%.
- Page 11 14SR the deluxe transom seat features two straps in is not compatible with the front and two straps the 8.10YT. in the rear. Unzip the zippers on the Position the aluminum side to reveal the one- panel on the outside of...
- Page 12 Sport on your Sea Eagle. Runabout models can easily fit a swivel seat kit on both the back and front placements.
- Page 13 Protectant sprays you Be sure the “logo” on can keep the material the mount reads upright on your Sea Eagle Boat when looking from in- looking and feeling like board before securing new. Sold separately. the mount with the pro-...
- Page 14 Sea Eagle). cure and comfortable fit. Paddling Life Vest Portable Charger (OPTIONAL) (OPTIONAL) Sea Eagle Life Jackets Protect and preserve are durable, look great your battery life with this and most importantly portable 10 AMP, Minn are U.S. Coast Guard Kota battery charger.
-
Page 15: Troubleshooting
If you’re planning to leave your Sea Eagle outside, be sure out of the boat as you to keep it raised up off of the ground. Its also a good idea to go along. - Page 16 Repairs For immediate use allow 30 minutes to dry Although our Sea Eagles are very rugged and tough, you and then inflate the may still experience the occasional puncture through use of compartment with the your boat. Fortunately most repairs are fairly easy and only repair only 3/4 full and take a few minutes.
- Page 17 TIP: Using a hair dryer (10 seconds should be fine), heat material to the boat so up the glue on both the glue-on pad and your Sea Eagle. use it very carefully and sparingly. Mate the two sides, pressing out any air pockets or bubbles along the way.
- Page 18 Valve Replacement DO NOT change out the valve unless you are sure it is broken. In most cases the valve will not leak. Because the base of the valve is built into the boat it can- not be replaced without cutting the chamber open.