Vivo MOUNT-E-UP44 Instruction Manual

Vivo MOUNT-E-UP44 Instruction Manual

Motorized tv stand with remote control

Advertisement

Quick Links

Motorized TV Stand with Remote Control
Instruction Manual
SKU: MOUNT-E-UP44
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/mount-e-up44
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MOUNT-E-UP44 and is the answer not in the manual?

Questions and answers

Summary of Contents for Vivo MOUNT-E-UP44

  • Page 1 Motorized TV Stand with Remote Control Instruction Manual SKU: MOUNT-E-UP44 Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/mount-e-up44 GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com...
  • Page 2 WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
  • Page 3 ASSEMBLY STEPS STEP 1 Prepare the cabinet before installation. Make sure you have at least 50mm of space in the front, top, and both sides of the TV inside of the cabinet. Plug Motorized Column (A) into Control Unit (G). STEP 2 Slide cable for AC Adapter (H) through Adapter Bracket (I).
  • Page 4 STEP 3 Mount Support Bracket (B) to Motorized Column (A) using M6x12 Screws (S-C) and 4mm Allen Wrench (T-A). STEP 4 Assemble Side Brackets (C) to Motorized Leg (A) using M6x12 Screws (S-C) and 4mm Allen Wrench (T-A). STEP 5 Secure Lid Support (D) to Side Brackets (C) using M6x12 Screws (S-C) and 4mm Allen Wrench (T-A).
  • Page 5 STEP 6 Note, pairing the Remote (K) maybe needed to continure. With the mount pluged in, if the mount will not respond to the remote, please follow the pairing instructions found in the remote control manual before proceeding. Use Remote (K) to raise Motorized Column (A) to the highest setting. Assemble TV Plate (E) to Support Bracket (B) using M10x20 Bolts (S-D) and M10 Nuts (S-E).
  • Page 6 STEP 8 Mark drilling location inside of the cabinet using Control Unit (G) and Adapter Bracket (I). Using a 3mm (1/8”) drill bit, predrill holes approximately 15mm (0.6”) deep. Secure Control Unit (G) using ST4.2x20 Screws (S-B) and Adapter Bracket (I) using ST5.5x16 Screws (S-A) and a Phillips screwdriver.
  • Page 7 STEP 11 Hang VESA Brackets (F) onto TV Plate (E) and secure by tightening security screws on the underside of VESA Brackets (F) using a Phillips screwdriver. STEP 12 Operate mount using Remote (K).
  • Page 8 AVG. RESPONSE TIME (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...

Table of Contents