Table of Contents
Advertisement
4. Touchpad Reader
Select the
mounted.
•
the Touchpad Reader baseplate to the wall.
• Use 4 screws and screw anchors, or double sided
adhesive strip.
1. Release lid screw and open the lid.
2. Insert new
the "+" "-" signs.
3. Close the lid and
4. Touch [#] for 5 seconds.
Notes:
• A short beep sound
a green [OK]
for 2 seconds.
Important: Do not touch the Touchpad
during the self-test procedure and
lights are
When
need recharging, a red
warning signal will blink rapidly and long
beep will sound during every lock/unlock
ENTR™ User Manual
where the Touchpad Reader will be
(2xAA) according to
the screw.
and
is illuminated
the
21
Advertisement
Table of Contents
