Table of Contents
Advertisement
Warning: Do not
• Press & hold the knob (1) and turn slightly (2)
protruding from the side of the cylinder body (see
• Insert the cylinder (including baseplate & knob) from the interior side of the door.
• Once the cylinder is correctly aligned within the door, secure the cylinder in place
using the M5 screw.
• Do not over
Note: Do not hammer (or use any other excessive force) on the cylinder or knob when
them into the door.
• Turn the knob back to the zero
Note: The knob will jump out when returned to zero
6
to operate the unit
the screw or use power tools to do so.
assembled on the door.
the cylinder cam is no longer
Knob marks point upwards.
Zero
ENTR™ User Manual
Advertisement
Table of Contents
