Kongsberg Simrad SU90 Manual page 53

2 On the menu, select
Setup
Observe that the
of pages selected from the menu on the left side.
3 On the left side of the
Installation Parameters
Observe that a menu opens with access to all the individual pages.
4 Select
Transducer
a Obtain the alignment angle from the personnel that installed the hull unit.
b Make sure that the correct offset values have been inserted.
c Make sure that the correct installation angles have been inserted.
d Record the information in the result table.
5 Continue your work in the
Result
Transducer offsets
X Offset
Installation angle X
Requirements
All offset values and rotation angles are entered in the SU90 system.
All values are correct.
All values are recorded in the relevant table.
Date and signature:
Related topics
Verifying the installation parameters, page 50
409977/C
Installation
dialog box opens. This dialog box contains a number
Installation
dialog box, select the small white triangle next to
Installation
.
to open the page.
Installation
Y Offset
Installation angle Y
.
dialog box, or select
Test procedures
to close it.
OK
Z Offset
Installation angle Z
Results
53