Purpose; Personnel And Location; Referenced Documents - Kongsberg Simrad SU90 Manual

Simrad SU90 Harbour Acceptance Test

Purpose

This is the Harbour Acceptance Test for the Simrad SU90 Fish-finding sonar.
The purpose of this Harbour Acceptance Test is to verify that the SU90 system provided
to the vessel is correctly installed, and fully functional. It is then ready for the Sea
Acceptance Test. When all the tasks have been done, the report form must be signed by
the relevant parties. The completed document then becomes the official report.

Personnel and location

Successful completion of the test requires qualified and experienced test engineers
and/or technicians.
This Harbour Acceptance Test is done on board the vessel, alongside the quay. The
test is done by personnel from Kongsberg Maritime. All personnel must have good
knowledge of the product and/or module(s) at hand.
A representative from an authorized dealer or distributor can do the Harbour Acceptance
Test on behalf of Kongsberg Maritime.
Representatives from the client and/or end user are normally present to witness the
test and results.
As with all assembly and test procedures related to advanced technical and/or electronic
equipment, the skill of the operator is vital to a successful completion of the tasks. The
only way to secure high quality of our products is first rate workmanship and high
professional standards throughout the production chain.
It is equally important that all members of the production and test crews show initiative,
and are willing to suggest improvements to functionality, design, procedures and
documents. If you find a mistake in a document, or find that information is missing,
offer this information to the proper authorities without further delay. Likewise, your
experience as a skilled worker is valuable. Please forward any suggestions to make
improvements to the product, the design, the production method, or any other matters
related to your expertise.

Referenced documents

The installation and use of the SU90 is described in several documents and end user
manuals. Internal test documents are used throughout the production and test of the
SU90.
This list is not complete. Additional documents and end user manuals are available for
the SU90. These publications are not relevant for this Harbour Acceptance Test.
6
409977/C