Fluid Temperature Range - Graco Husky 1050HP Operation

Sound Power (measured per ISO-9614–2)
At 70 psi (0.48 MPa, 4.8 bar) and 50 cpm
Low Pressure Setting
High Pressure Setting
At 100 psi (0.7 MPa, 7.0 bar) and full flow
Low Pressure Setting
High Pressure Setting
Sound Pressure (tested 3.28 ft [1 m] from equipment)
At 70 psi (0.48 MPa, 4.8 bar) and 50 cpm
Low Pressure Setting
High Pressure Setting
At 100 psi (0.7 MPa, 7.0 bar) and full flow
Low Pressure Setting
High Pressure Setting
Wetted parts
Non-wetted external parts

Fluid Temperature Range

Temperature limits are based on mechanical stress only. Certain chemicals will further limit the fluid
operating temperature range. Stay within the temperature range of the most-restricted wetted component.
Operating at a fluid temperature that is too high or too low for the components of your pump may cause
equipment damage.
Diaphragm/Ball Material
Buna-N (BN)
Geolast (GE)
Polychloroprene overmolded
diaphragm (CO) or
Polychloroprene check balls
(CW)
2–Piece PTFE/Santoprene
Diaphragm
Santoprene® (SP)
334014B
Springer Pumps, LLC
Telford, PA 18969
aluminum plus the material(s) chosen for seat, ball,
NOTICE
Fahrenheit
10° to 180°F
–40° to 150°F
0° to 180°F
40° to 180°F
-40° to 180°F
Tel: 866-777-6060 / Int'l: 215-949-2900
Fax: 866-777-6383 / Int'l: 215-721-1296
78 dBa
91 dBa
90 dBa
102 dBa
84 dBa
96 dBa
84 dBa
96 dBa
and diaphragm options.
aluminum, coated carbon steel
Fluid Temperature Range
-12° to 82°C
–40° to 66°C
–18° to 82°C
-40° to 82°C
Technical Data
Celsius
4° to 82°C
21
shop.springerpumps.com
info@springerpumps.com