Technical Data - Graco Husky 1050HP Operation

Technical Data

Technical Data
Maximum fluid working pressure
Air pressure operating range
Fluid displacement per cycle
Low Pressure Setting
High Pressure Setting
Air consumption
Low Pressure Setting
High Pressure Setting
Maximum values with water as media under submerged inlet conditions at ambient temperature:
Maximum air consumption
Low Pressure Setting
High Pressure Setting
Maximum free-flow delivery
Low Pressure Setting
High Pressure Setting
Maximum pump speed
Low Pressure Setting
High Pressure Setting
Maximum suction lift (varies widely
based on ball/seat selection and
wear, operating speed, material
properties, and other variables)
Maximum size pumpable solids
Recommended cycle rate for continuous
use
Recommended cycle rate for circulation
systems
Air inlet size
Fluid inlet size
Fluid outlet size
Weight
20
Springer Pumps, LLC
Telford, PA 18969
US
250 psi
20-125 psi
0.17 g
0.20 g
at 70 psi, 20 gpm
26 scfm
51 scfm
59 scfm
95 scfm
50 gpm
46 gpm
16 ft dry,
29 ft wet
1/8 in
48 lb (aluminum manifolds)
60 lb (SST manifolds)
Tel: 866-777-6060 / Int'l: 215-949-2900
Fax: 866-777-6383 / Int'l: 215-721-1296
1.72 MPa,17.2 bar
0.14-0.86 MPa, 1.4-8.6 bar
at 4.8 bar, 76 lpm
0.7 cubic meters per minute
1.4 cubic meters per minute
1.7 cubic meters per minute
2.7 cubic meters per minute
280 cpm
225 cpm
4.9 m dry
8.8 m wet
93–140 cpm
(in Low or High setting)
20 cpm
(in Low or High setting)
3/4 npt(f)
1 in. npt(f) or 1 in. bspt
1 in. npt(f) or 1 in. bspt
21.8 kg (aluminum manifolds)
27.2 kg (SST manifolds)
Metric
0.64 l
0.76 l
189 lpm
174 lpm
3.2 mm
334014B
shop.springerpumps.com
info@springerpumps.com