Typical Floor Mount Installation - Graco Husky 1050HP Operation

Installation

Typical Floor Mount Installation

Figure 3 Typical floor mount installation
KEY
A Air supply line
B Bleed-type master air valve (required for
pump)
C Air filter and regulator
D Air inlet
E Master air valve (for accessories)
F
Flexible fluid suction hose
G Optional needle valve for pump speed
adjustment.
12
Springer Pumps, LLC
Telford, PA 18969
Tel: 866-777-6060 / Int'l: 215-949-2900
Fax: 866-777-6383 / Int'l: 215-721-1296
J
Fluid drain valve (required)
K Fluid shutoff valve
L Flexible fluid outlet hose
M Fluid inlet (2 ports on aluminum manifolds,1
port on SST manifolds)
N Fluid outlet (2 ports on aluminum manifolds,1
port on SST manifolds)
R
Ground wire (required; see
Grounding, page 8 ).
334014B
shop.springerpumps.com
info@springerpumps.com