Grandstream Networks HT814 Administration Manual page 38

https://arttel.ru/
SUBSCRIBE for
MWI
Send Anonymous
Anonymous Call
Rejection
https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-814
e. [3-5] - any digit of 3, 4, or 5;
[147] - any digit 1, 4, or 7;
f.
g. <2=011> - replace digit 2 with 011 when dialing
h. < =1> - add a leading 1 to all numbers dialed, vice versa will remove a
1 from the number dialed
| - or
i.
• Example 1: {[369]11 | 1617xxxxxxx} –
Allow 311, 611, 911, and any 10 digit numbers of leading digits 1617
• Example 2: {^1900x+ | <=1617>xxxxxxx} –
Block any number with leading digits 1900 and add prefix 1617 for any
dialed 7 digit numbers
Example 3: {1xxx[2-9]xxxxxx | <2=011>x+} –
•
Allow any length of number with leading digit 2 and 10 digit-numbers of
leading digit 1 and leading exchange number between 2 and 9; If leading
digit is 2, replace leading digit 2 with 011 before dialing.
3. Default: Outgoing - {x+}
Example of a simple dial plan used in a Home/Office in the US:
{ ^1900x. | <=1617>[2-9]xxxxxx | 1[2-9]xx[2-9]xxxxxx | 011[2-9]x. | [3469]11 }
Explanation of example rule (reading from left to right):
• ^1900x. - prevents dialing any number started with 1900
• <=1617>[2-9]xxxxxx - allows dialing to local area code (617) numbers by dialing
7 numbers and 1617 area code will be added automatically
• 1[2-9]xx[2-9]xxxxxx - allows dialing to any US/Canada Number with 11 digits
length
• 011[2-9]x. - allows international calls starting with 011
• [3469]11 - allow dialing special and emergency numbers 311, 411, 611 and 911
Note: In some cases, user wishes to dial strings such as *123 to activate voice mail or
other application provided by service provider. In this case * should be predefined inside
dial plan feature. An example dial plan will be: { *x+ } which allows the user to dial *
followed by any length of numbers.
Sends SUBSCRIBE periodically (depends on "Register Expiration" parameter) for
message waiting indication. Default is No.
Sets "From", "Privacy" and "P_Asserted_Identity" headers in outgoing INVITE message
to "anonymous", blocking caller ID. Default is No.
Rejects incoming calls with anonymous caller ID with "486 Busy here" message.
Default is No.
HT814 Administration Guide
P a g e | 37