Grandstream Networks HT814 Administration Manual page 37

https://arttel.ru/
Ring Timeout
Hunting Group Ring
Timeout
Hunting Group Type Determines the hunting group type (linear or circular). Linear style will sort the call to the
Delayed Call
Forward Wait
Timeout
No Key Entry
Timeout
Early Dial
Dial Plan Prefix
Use # as Dial Key
Dial Plan
https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-814
Default is No.
Stops ringing when incoming call if not answered within a specific period of time. Default
is 60 seconds.
Defines when the call is not answered within this designated time period, the call will be
forwarded to the next member of a Hunt Group. Default value is 20 Sec.
lowest numbered available line, this is also called "serial hunting". Circular style will
distribute the calls "round-robin". If a call is assigned to line 1, the next call goes to 2
and the next to 3. The succession throughout each of the lines continues even if one of
the previous lines becomes available. When the end of the hunt group is reached, the
hunting starts over at the first line. Lines are skipped if they are still busy on a previous
call. Default is Circular.
Forwards incoming call if not answered within a specific period of time when delayed
call forward is activated locally (using *92 code). Default value is 20 seconds.
Initiates the call within this time interval if no additional key entry during dialing stage.
Default is 4 seconds.
Sends an early INVITE each time a key is pressed when a user dials a number.
Otherwise, only one INVITE is sent after full number is dialed (user presses Dial Key or
after "no key entry timeout" expires). This option should be used only if there is a SIP
proxy is configured and supporting "484 Incomplete Address" responses. Otherwise, the
call will likely be rejected by the proxy (with a 404 Not Found error). Default is No.
This feature is NOT designed to work with and should NOT be enabled for direct IP-to-
IP calling.
Adds specified prefix to dialed number.
Treats "#" as the "Send" (or "Dial") key. If set to "No", this "#" key can be included as part
of the dialed number. Default is Yes.
Dial Plan Rules:
1. Accept Digits: 1,2,3,4,5,6,7,8,9,0 , *, #, A,a,B,b,C,c,D,d
2. Grammar: x - any digit from 0-9;
a. xx+ - at least 2 digits number;
b. xx – exactly 2 digits number;
c. ^ - exclude;
d. . – wildcard, matches one or more characters
HT814 Administration Guide
P a g e | 36