Grandstream Networks HT814 Administration Manual page 29

https://arttel.ru/
SIP TLS Private
Key Password
Enable TR-069
ACS URL
ACS Username
ACS Password
Periodic Inform
Enable
Periodic Inform
Interval
Connection
Request Username
Connection
Request Password
CPE SSL
Certificate
CPE SSL Private
Key
System Ring
Cadence
Call Progress
Tones
https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-814
Specifies SSL Private key password used for SIP Transport in TLS/TCP.
Sets the phone system to enable the "CPE WAN Management Protocol" (TR-069).
Default setting is No.
Specifies URL of TR-069 Auto Configuration Servers (e.g.,
http://acs.mycompany.com), or IP address.
Enters username to authenticate to ACS.
Enters password to authenticate to ACS.
Sends periodic inform packets to ACS. Default is No
Sets frequency that the inform packets will be sent out to ACS.
Enters username for ACS to connect to the HT814.
Enters password for ACS to connect to the HT814.
Configures the Cert File for the phone to connect to the ACS via SSL.
Specifies the Cert Key for the phone to connect to the ACS via SSL.
Sets ring cadences for all incoming calls.
Syntax: c=on1/off1-on2/off2-on3/off3;) Default is set to c=2000/4000; (US
standards) on1 is the period of ringing ("On time" in "ms") while off1 is the period
of silence. Up to three cadences are supported.
Configures tone frequencies according to user preference. By default, the tones
are set to North American frequencies. Frequencies should be configured with
known values to avoid uncomfortable high pitch sounds. ON is the period of ringing
(ON time in ms) while OFF is the period of silence. In order to set a continuous
ring, OFF should be zero. Otherwise it will ring ON ms and a pause of OFF ms and
then repeats the pattern.

"Dial tone"

"Ring back tone"
HT814 Administration Guide
P a g e | 28