Grandstream Networks HT814 Administration Manual page 36

https://arttel.ru/
Header
Distinctive Ring
Tone
Disable Call Waiting Disables receiving a second incoming call when the line is engaged. Default is No.
Disable Call Waiting
Caller ID
Disable Call Waiting
Tone
Disable Connected
Line ID
Disable Receiver
Off hook Tone
Disable Reminder
Ring for On-Hold
Call
Disable Visual MWI
Do Not Escape '#'
as %23 in SIP URI
Disable Multiple m
Line in SDP
https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-814
Customizes the Ring Tone 1 to 3 with associate caller ID: when selected, if caller ID is
configured, then the device will ONLY use this ring tone when the incoming call is from
the Caller ID. System Ring Tone is used for all other calls. When selected but no Caller
ID is configured, the selected ring tone will be used for all incoming calls using the FXS
port. Distinctive ring tones can be configured not only for matching a whole number, but
also for matching prefixes. In this case symbol * (star) will be used.
For example: if configured as *617, Ring Tone 1 will be used in case of call arrived from
the area code 617. Any other incoming call will ring using cadence defined in parameter
System Ring Cadence located under Advanced Settings Configuration page.
Note: If server supports Alert-Info header and standard ring tone set (Bellcore) or
distinctive ring tone 1-10 is specified, then the ring tone in the Alert-Info header from
server will be used. Bellcore rings and tones are independent from custom ring tones.
The custom ring tones can also be specified by alert-info header, for example Alert-
Info: ;info=ring5
Disables displaying caller ID when receiving a second incoming call. Default is No.
Disables playing call waiting tone during active call when receiving a second incoming
call. The CWCID will still be displayed. Default is No.
Disables displaying the number of the person answering the phone. Default is No.
Enables / disables the warning to alert that the phone has been left off-hook for an
extended period of time.
Default is No.
Enables playing the reminder ring. Default is No
Disables use of visual message waiting indicator when there is an unread voicemail
message. Default is No.
Replaces # by %23 in some special situations. Default is No.
Sends only one m line in SDP, regardless of how many m fields are in the incoming SDP.
HT814 Administration Guide
P a g e | 35