Ship Mode; Figure 4-5. Register Map; Figure 4-6. Ship_Rst Register - Texas Instruments BQ25180 User Manual

Testing Procedures
The register map is shown in

4.3 Ship Mode

To go to Ship Mode, enable ship mode through an I
PB_LPRESS_ACTION bits as shown in
• EN_RST_SHIP = 2b01 (Enable shipmode with wake on button press or adapter insert)
• PB_PRESS_ACTION = 2b10 (Enable shipmode)
Enter ship mode by removing VIN if setting EN_RST_SHIP to 2b01. If setting PB_LPRESS_ACTION to 2b10 to
enable shipmode, hold the TS/MR button for the configured t
You will know you are in Ship Mode as the voltage on the SYS (SC#2) will fall to 0 V.
8 BQ25180 EVM User's Guide
Figure 4-5.

Figure 4-5. Register Map

2
C transaction to set EN_SHIP_RST bits or the
Figure 4-6:

Figure 4-6. SHIP_RST Register

Copyright © 2022 Texas Instruments Incorporated
then remove VIN.
LPRESS
SLUUCH5A – AUGUST 2021 – REVISED JANUARY 2022
www.ti.com
Submit Document Feedback