EVM Connectors and Test Points
3 EVM Connectors and Test Points
Table 3-1
shows the default configuration for connectors.
Jumper Name
Connecting the J7 jumper will enable the VIO LED. This LED will draw 10mA.
4
BQ25180 EVM User's Guide
Table 3-1. Factory Jumper Settings
Description
J1
J2
VIN and GND connector
J3
VBAT and GND connector
J4
Battery Pack Connector
J5
TS Potentiometer Connector
J6
USB2ANY Connector
J7
VIO Connector to 3p3V.
J8, J9
Board connector to other
J10
/INT connector to 3p3V
J11
VSYS and GND connector
J14
Micro USB connector (optional for
Copyright © 2022 Texas Instruments Incorporated
I2C Pullup
modules
Connect 3p3V to /INT
VIN)
Note
SLUUCH5A – AUGUST 2021 – REVISED JANUARY 2022
www.ti.com
Setting
NA
NA
NA
NA
Connected
NA
NA
NA
NA
NA
Submit Document Feedback