Power Supply Requirements - Graco E-Flo EC1140 Instructions-Parts List Manual

Installation
Power Supply Supply Requirements Requirements
Power Power Supply Requirements
To avoid injury from fire, explosion, or electric
shock, all electrical wiring must be done by a
qualified electrician and comply with all local codes
and regulations.
See Table 1 for power supply requirements. The
system requires a dedicated circuit protected with a
circuit breaker.
Table 1 1 1 . . . Power Power Supply Supply Specifications Specifications
Table Table Power Supply Specifications
Model Model Model Voltage Voltage Voltage
EM0011 100–250
EM0012 Vac
EM0013
EM0014
EM0021 200–250
EM0022 Vac
EM0023
EM0024
8
All manuals and user guides at all-guides.com
Phase Phase Phase Hz Hz Hz Current Current Current
1 50/60 20 A
1 50/60 20 A
Hazardous Area Area Cabling Cabling and
Hazardous Hazardous Area Cabling
Requirements Requirements Requirements
Explosion Proof Proof
Explosion Explosion Proof
All electrical wiring in the hazardous area must be
encased in Class I, Division I, Group D approved
explosion-proof conduit. Follow all National, State,
and Local electric codes.
A conduit seal (D) is required within 18 in. (457 mm)
of the motor for the US and Canada. See Fig. 3.
All cables must be rated at 70°C (158°F).
Flame Proof Proof (ATEX) (ATEX)
Flame Flame Proof (ATEX)
Use appropriate conduit, connectors, and cable
glands rated for ATEX II 2 G. Follow all National,
State, and Local electric codes.
All cable glands and cables must be rated at 70°C
(158°F).
and Conduit Conduit
and Conduit
3A3384B