Graco E-Flo EC1140 Instructions-Parts List Manual page 17

8. Models Models with Models with with Sealed Sealed Lowers: Sealed Lowers: Install the shields Lowers:
(12) by engaging the bottom lips with the groove
in the top plate. Snap the two shields together.
9. Flush and test the pump before reinstalling
it in the system. Connect hoses and flush
the pump. While it is pressurized, check for
smooth operation and leaks. Adjust or repair
as necessary before reinstalling in the system.
Reconnect the pump ground wire before
operating.
3A3384B
All manuals and user guides at all-guides.com
Figure 6 Pump Assembly; Lower with Open Wet
Cup Shown
Notes
Notes Notes
Torque to 50–60 ft-lb (68–81 N•m).
Torque to 90–100 ft-lb (122–135 N•m).
Repair
17