Troubleshooting Checklist - DPS Telecom T/Mon/IAM Manual

Setup Remote Port
o From the Master Menu, Select "Parameters"
o Select "Remote Ports"
o Once in the Remote Parameters screen, you will be defaulted to the last port that
was being edited. To find Port 28, press the 'F' key to Find a port.
o Enter '28' in the 'Remote' Field
NOTE: This will be your Ethernet port. If you're using a polling channel other than LAN,
use ports 1-24. This only needs to be set up one time in T/Mon and is used for all
LAN based connections.

Troubleshooting Checklist