2: Evaluation Kit; Xpico 110 Evaluation Kit Contents; Xpico 110 Evaluation Kit Description - Lantronix xPico 110 User Manual

2: Evaluation Kit
The xPico 110 evaluation kit helps you get familiar with your xPico 110 wired device server so
that you may understand how to integrate it into a given product design.

xPico 110 Evaluation Kit Contents

♦
xPico 110 Module
♦
xPico Evaluation Board
♦
5V Wall Adaptor

xPico 110 Evaluation Kit Description

The xPico 110 evaluation kit provides a test platform for the Lantronix xPico 110 device server.
The evaluation kit uses either 5V power from a USB device port connector or power supplied to
the Ethernet connector via PoE. The evaluation kit also provides a header for connection to a
2.2V to 5.5V external source, such as a battery. The evaluation kit includes a 5V wall adapter with
a USB plug to allow powering the evaluation kit from a standard power strip. The evaluation kit
includes all necessary regulators to power the 3.3V xPico 110 module. The evaluation kit has the
following features:
♦
One DB9M serial port connector with a multi-protocol RS232, RS422, RS485 transceiver
at rates up to 1Mbps. Serial port modes are configured by on-board jumpers.
♦
A second RS232 serial port is available on a header.
♦
One RJ45 10/100 Ethernet port with an integrated PoE regulator to allow powering from
standard POE PSE.
♦
One Mini-Type B USB device port connector for 5V input power. This port also has an
integrated USB-to-Serial converter. The USB-to-Serial converter can be connected to the
xPico second serial port via a board jumper setting.
♦
LEDs for the xPico Ethernet, WLAN, Serial port activities, and System status outputs
along with two additional LEDs that can be driven via jumper wire are provided.
♦
Access to all logic level IO signals on the xPico via header pins for measurements and
connections to other places.
The figure below shows the xPico evaluation kit and highlights all of the various connectors
and configuration jumpers. The following table lists each of the connectors and jumper headers
along with their function. Further description and pin assignments are included in subsequent
sections.
xPico® 110 Wired Device Server Module Evaluation Kit User Guide 7