Solid-State Drive; Removing The M.2 2230 Solid-State Drive - Dell OptiPlex 3280 Service Manual

Steps
1. Align the screw holes on the system-board shield with the screw holes on the display-assembly base.
2. Replace the five screws (M3x5) to secure the system-board shield to the display-assembly base.
Next steps
1. Install the back cover
2. Install the cable cover
3. Install the stand.
4. Follow the procedure in

Solid-state drive

Removing the M.2 2230 solid-state drive

Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the cable cover
4. Remove the back cover.
5. Remove the system-board
30 Removing and installing components
(optional).
After working inside your
Before working inside your
(optional).
shield.
computer.
computer.