Graphics-Card Bracket And Graphics-Card End Holder; Solid-State Drive; Removing The 2230 Solid-State Drive In Ssd Slot One - Dell Alienware Aurora R15 Service Manual

Next steps
1. Install the left-side cover.
2. Follow the procedure in

Graphics-card bracket and graphics-card end holder

The following table shows whether the graphics-card bracket or/and the graphics-card end holder is/are shipped with your
Alienware Aurora R15.
Table 3. Graphics-card bracket and graphics-card end holder
Graphics card
AMD Radeon RX 6500 XT
AMD Radeon RX 6600 XT
AMD Radeon RX 6700 XT
AMD Radeon RX 6800 XT
AMD Radeon RX 6900 XT
NVIDIA GeForce RTX 3050
NVIDIA GeForce RTX 3060
NVIDIA GeForce RTX 3060 Ti
NVIDIA GeForce RTX 3070
NVIDIA GeForce RTX 3070 Ti
NVIDIA GeForce RTX 3080
NVIDIA GeForce RTX 3080 Ti
NVIDIA GeForce RTX 3090
NVIDIA GeForce RTX 3090 Ti
NVIDIA GeForce RTX 4080
NVIDIA GeForce RTX 4090

Solid-state drive

Removing the 2230 solid-state drive in SSD slot one

Prerequisites
1. Follow the procedure in
2. Remove the left-side
About this task
NOTE: This procedure applies only to computers shipped with a 2230 solid-state drive installed in SSD slot one.
The following images indicate the location of the 2230 solid-state drive that is installed in SSD slot one and provide a visual
representation of the removal procedure.
52 Removing and installing components
After working inside your
Graphics-card bracket
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Before working inside your
cover.
computer.
computer.
Graphics-card end holder
No
No
No
Yes
Yes
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes