Stand; Removing The Fixed Stand - Dell OptiPlex 3280 Service Manual

Table 1. OptiPlex 3280 All-in-One screw list (continued)
Component
Antennas
Display panel
Middle frame
Audio board

Stand

Removing the fixed stand

Prerequisites
1. Follow the procedure in
NOTE: When servicing the system, place it on an elevated, clean, and flat surface. Dell recommends removing the stand to
avoid accidental damage to the system display during servicing.
About this task
The following image provides a visual representation of the fixed stand removal procedure.
12 Removing and installing components
Screw type
M2x2.5
M3x5
M3x5
M3x5
Before working inside your
Quantity
2
8
11
1
computer.
Screw image