Display Symbols; Frequently Asked Questions (Faqs) - Dometic Go Power! DURALITE 100 User Manual

ERRORS AND TROUBLESHOOTING
FLASHING
Solution
This is an Overvoltage Error. The battery voltage is too high. Disconnect the DuraLite kit and plug in a power draw to lessen the
voltage in the battery.
FLASHING
Solution
This is an Over Discharge Error. The battery voltage is too low. Connect the DuraLite kit to charge the battery.

7. DISPLAY SYMBOLS

ICON
8. FREQUENTLY ASKED QUESTIONS
Before a problem is suspected with the system, read this section. There are numerous events that may appear as problems but are
in fact perfectly normal. Please visit https://gpelectric.com/support/ for the most up-to-date FAQs and troubleshooting videos.
It seems like my flooded batteries are losing water over time.
Flooded batteries may need to have distilled water added periodically to replace fluid loss during charging. Excessive water loss
during a short period of time indicates the possibility of overcharging or aging batteries.
When charging, my flooded batteries are emitting gas.
During charging, hydrogen gas is generated within the battery. The gas bubbles stir the battery acid allowing it to receive a fuller
state of charge.
MOTION
Solid
Energy bars are Flashing
Solid
Flashing
Flashing
ISSUE
The system is normal but not charging
Charging
Full
Battery Overvoltage
Battery Over Discharge
gpelectric.com | [page 11]