Removal: When the blade is damaged or needs to be
replaced, hold the propeller with a hand or the
provided auxiliary wrench, and remove by turning it in
the indicated "unlock" direction.
Make sure that the propellers are installed
•
in the correct positions, otherwise the
aircraft will not be able to fly normally.
Since the propeller blades are thin and
•
somewhat sharp, it is recommended that
users wear gloves during installation to
prevent accidental scratches.
1.4 Aircraft LED Indications
Function
Power on and start up
Compass Calibration
Horizontal Calibration
Binding
Flight: All LED flash simultaneously, front LEDs are white and rear LED colors are as
follows:
1)Normal Status: Yellow
2)GPS Mode: Green
3)Turn off GPS: Yellow
LED Status Indication
All LED flash yellow simultaneously
Horizontal Calibration has 4 LEDs flashing red in
the clockwise
direction; Vertical Calibration has 4 LEDs flashing
green in pairs
alternately
Flashing slowly in yellow
The front LEDs stay solid and rear LEDs flash
alternately
4)Low Battery: Red
5)Loss of signal: Purple
6)Return to Home: Blue
11